轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有圆柱孔的 SAF 和 SAW 式轴台 -- SKF FSAF 22317
FSAF 22317
尺寸
| da | 85 | mm | |
| db | 100.025 | mm | |
| dc | 80.975 | mm | |
| Da | 180 | mm | |
| Ca | 69.799 | mm | |
| A1 | 111.125 | mm | |
| A2 | 173.037 | mm | |
| S | 4.763 | mm | |
| ba | 48.419 | mm | |
| H | 222.25 | mm | |
| H1 | 114.3 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 295.275 | mm |
| J | max. | 333.375 | mm |
| J1 | 60.325 | mm | |
| L | 387.35 | mm | |
| N1 | 22.225 | mm | |
| 螺纹孔 | |||
| R1 | 66.675 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 44.45 | mm | |
配套产品
Included products
- 查询其它游隙组别（比如 C3）的供货情况
Associated products
| End plug (suffix Y) |
EPR 11
|
|||
额定转速
| 轴承转速限制值 | 3800 | r/min |
推荐的安全载荷
| P60° | 104 | kN | |
| P90° | 62.3 | kN | |
| P120° | 39.1 | kN | |
| P150° | 35.6 | kN | |
| P180° | 42.7 | kN | |
| Pa | 27.6 | kN |
质量
| 轴台质量 | 34.7 | kg |
Mounting information
| Cap bolt |
2 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 365.71 | g | ||