轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有圆柱孔的 SAF 和 SAW 式轴台 -- SKF FSAF 22220
FSAF 22220
尺寸
| da | 100 | mm | |
| db | 114.3 | mm | |
| dc | 96.838 | mm | |
| Da | 180 | mm | |
| Ca | 55.804 | mm | |
| A1 | 111.125 | mm | |
| A2 | 155.575 | mm | |
| S | 4.763 | mm | |
| ba | 44.45 | mm | |
| H | 217.488 | mm | |
| H1 | 114.3 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 295.275 | mm |
| J | max. | 333.375 | mm |
| J1 | 60.325 | mm | |
| L | 387.35 | mm | |
| N1 | 22.225 | mm | |
| 螺纹孔 | |||
| R1 | 58.737 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 42.069 | mm | |
配套产品
Included products
- 查询其它游隙组别（比如 C3）的供货情况
Associated products
| End plug (suffix Y) |
EPR 15
|
|||
额定转速
| 轴承转速限制值 | 4500 | r/min |
推荐的安全载荷
| P60° | 119 | kN | |
| P90° | 71.2 | kN | |
| P120° | 44.5 | kN | |
| P150° | 40 | kN | |
| P180° | 48.9 | kN | |
| Pa | 31.6 | kN |
质量
| 轴台质量 | 27.5 | kg |
Mounting information
| Cap bolt |
2 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 181.44 | g | ||