轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有圆柱孔的 SAF 和 SAW 式轴台 -- SKF FSAF 22218
FSAF 22218
尺寸
| da | 90 | mm | |
| db | 104.775 | mm | |
| dc | 85.725 | mm | |
| Da | 160 | mm | |
| Ca | 49.809 | mm | |
| A1 | 98.425 | mm | |
| A2 | 149.225 | mm | |
| S | 4.763 | mm | |
| ba | 40.481 | mm | |
| H | 192.484 | mm | |
| H1 | 101.6 | mm | |
| H2 | 41.275 | mm | |
| J | min. | 263.525 | mm |
| J | max. | 295.275 | mm |
| J1 | 53.975 | mm | |
| L | 349.25 | mm | |
| N1 | 19.05 | mm | |
| 螺纹孔 | |||
| R1 | 60.325 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 27.781 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 38.1 | mm | |
配套产品
Included products
- 查询其它游隙组别（比如 C3）的供货情况
Associated products
| End plug (suffix Y) |
EPR 11
|
|||
额定转速
| 轴承转速限制值 | 5300 | r/min |
推荐的安全载荷
| P60° | 101 | kN | |
| P90° | 60.9 | kN | |
| P120° | 38.3 | kN | |
| P150° | 34.7 | kN | |
| P180° | 42.3 | kN | |
| Pa | 27.1 | kN |
质量
| 轴台质量 | 21.2 | kg |
Mounting information
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 141.75 | g | ||