轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有圆柱孔的 SAF 和 SAW 式轴台 -- SKF SSAFS 22217 T
SSAFS 22217 T
尺寸
| da | 85 | mm | |
| db | 100.013 | mm | |
| dc | 80.963 | mm | |
| Da | 150 | mm | |
| Ca | 45.796 | mm | |
| A1 | 88.9 | mm | |
| A2 | 198.438 | mm | |
| S | 4.763 | mm | |
| ba | 35.719 | mm | |
| H | 187.325 | mm | |
| H1 | 95.25 | mm | |
| H2 | 38.1 | mm | |
| L | 330.2 | mm | |
| 螺纹孔 | |||
| R1 | 53.975 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 22.225 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 34.925 | mm | |
Included products
|
||||
| Taconite seal (db shaft position) |
TER 89
|
|||
| Taconite seal (dc shaft position) |
TER 63
|
|||
Associated products
| End plug (suffix Y) |
EPR 9
|
|||
Speed ratings
| Max. speed for Taconite seal | 775 | r/min |
推荐的安全载荷
| P60° | 84.5 | kN | |
| P90° | 50.7 | kN | |
| P120° | 31.6 | kN | |
| P150° | 28.5 | kN | |
| P180° | 34.7 | kN | |
| Pa | 22.2 | kN |
质量
| 轴台质量 | 23.6 | kg |
Mounting information
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 218.29 | g | ||