轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有圆柱孔的 SAF 和 SAW 式轴台 -- SKF SSAFS 22216 T
SSAFS 22216 T
尺寸
| da | 80 | mm | |
| db | 92.075 | mm | |
| dc | 76.2 | mm | |
| Da | 140 | mm | |
| Ca | 42.799 | mm | |
| A1 | 88.9 | mm | |
| A2 | 208.756 | mm | |
| S | 4.763 | mm | |
| ba | 34.131 | mm | |
| H | 174.625 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| L | 330.2 | mm | |
| 螺纹孔 | |||
| R1 | 53.181 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 31.75 | mm | |
Included products
|
||||
| Taconite seal (db shaft position) |
TER 82
|
|||
| Taconite seal (dc shaft position) |
TER 54
|
|||
Associated products
| End plug (suffix Y) |
EPR 9
|
|||
Speed ratings
| Max. speed for Taconite seal | 850 | r/min |
推荐的安全载荷
| P60° | 83.2 | kN | |
| P90° | 49.8 | kN | |
| P120° | 30.2 | kN | |
| P150° | 26.7 | kN | |
| P180° | 31.6 | kN | |
| Pa | 20.5 | kN |
质量
| 轴台质量 | 20.4 | kg |
Mounting information
| Cap bolt |
2 x 5/8-11 UNC
|
|||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 175.77 | g | ||