da | 96.838 | mm | |
Da | 200 | mm | |
Ca | 62.89 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
螺纹孔 | |||
R1 | 67.866 | mm |
Threaded holes | |||
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
轴承座 |
SAFS 522
|
|||
轴承 | ||||
紧定套组件 | ||||
稳定轴承环 |
SR-22-19
|
|||
密封件 |
2 x LOR 107
|
|||
|
End plug (suffix Y) |
EPR 13
|
轴承转速限制值 | 4000 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
轴台质量 | 52.2 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
热搜型号:150 VA V190056322208 E2316 M350 VL R36x47x7 HMSA10 RG7016 CB/HCP4ABD-C 3180 KM-AOH 3180 GMB 48NU 211 ECMLPCZ 4832 MPSM 506035 A51SAF 22622 x 3.13/16 TLCSAF 23034 KAT x 5.7/8W 619/4-2ZASAHI UC216 SKF 61909-2RS1 NSK NU 1044 SIGMA 6206 NTN 6304ZZ INA HK 24x30x7.5 TN NKE NJ336-E-MPA+HJ336-E SKF NU 2224 ECNML ISO SI 16 INA ZARN2062-TV NTN SCE-98 SKF 23061 SKF STO 12 SNR 16017 NOK 1BP-275