轴承、轴承单元和轴承座 -- 轴承座 -- Split pillow blocks- SAF and SAW series (inch dimensions) -- 紧定套上带有轴承的 SAF 和 SAW 式轴台 -- SKF SAF 22522 x 4
SAF 22522 x 4
尺寸
| da | 101.6 | mm | |
| Da | 200 | mm | |
| Ca | 62.789 | mm | |
| A1 | 120.65 | mm | |
| A2 | 165.1 | mm | |
| S | 4.763 | mm | |
| ba | 50.006 | mm | |
| H | 239.316 | mm | |
| H1 | 125.425 | mm | |
| H2 | 50.8 | mm | |
| J | min. | 320.675 | mm |
| J | max. | 368.3 | mm |
| J1 | 69.85 | mm | |
| L | 419.1 | mm | |
| N1 | 22.225 | mm | |
| 螺纹孔 | |||
| R1 | 67.866 | mm | |
Dimensions
| Threaded holes | |||
| R2 | 31.75 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 45.244 | mm | |
Associated products
| End plug (suffix Y) |
EPR 13
|
|||
额定转速
| 轴承转速限制值 | 4000 | r/min |
推荐的安全载荷
| P60° | 149 | kN | |
| P90° | 89 | kN | |
| P120° | 55.6 | kN | |
| P150° | 50.7 | kN | |
| P180° | 60.9 | kN | |
| Pa | 17.3 | kN |
质量
| 轴台质量 | 33.1 | kg |
Mounting information
| Cap bolt |
2 x 3/4-10 UNC
|
|||
| Cap bolt recommended tightening torque | 359.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 232.47 | g | ||